GM 2.4L Ecotec Engine Buyer’s Guide: All You Need To Know

If you own a 2011–2017 Buick Regal, Chevy Equinox, GMC Terrain, or another GM SUV with a 2.4L Ecotec engine, chances are you’ve already heard about the issues these motors are known for. From excessive oil consumption to overheating and premature wear, the 2.4L Ecotec has earned a bit of a reputation in the automotive world.

But before you give up on your ride or sink money into a questionable repair, it’s worth taking a closer look at our remanufactured GM 2.4L Ecotec engines. Our industry-leading warranty and rigorous remanufacturing process gives these engines give new life and can save your vehicle from the scrapyard. Plus, we’ve got them at a sale price that can’t be beat!

What Causes The 2.4L Ecotec To Fail?

Let’s face it – this engine wasn’t GM’s finest moment. The #1 customer complaint has long been excessive oil consumption. Left unchecked, burnt oil makes its way into the exhaust, clogging catalytic converters. That clog builds up backpressure, which in turn leads to overheating. And overheating? That’s the silent killer of engines everywhere, leading to premature wear on pistons, rings, valves, timing components, and more.

That’s why diagnosis is critical. If your original 2.4L failed due to overheating, it’s very likely your catalytic converters need to be replaced at the same time as your engine. Skip this step, and you risk repeating the same costly failure.

Close behind that problem is the issue of timing failure. This problem shows up frequently, and in most cases, it’s caused by a tensioner whose top bolt has a tendency to loosen as the engine racks up miles.

How Powertrain Products Remanufactures Engines

A remanufactured engine isn’t the same as a simple rebuild. At Powertrain Products, every Ecotec 2.4L is fully disassembled, inspected, machined, and rebuilt with new parts that meet or exceed OEM specifications. Here’s what sets our engines apart:

• Deep Clean – To start the remanufacturing process, every engine is fully disassembled and hot tanked (cast iron) or thermally cleaned (aluminum)
• Inspection – Magnaflux testing uses magnetic particles to inspect metal, checking for microscopic cracks and fissures that will cause long-term failure. All parts are visually inspected as well.
• Machining and New Parts – Deck surfaces are CNC-machined, and new parts are added. New parts include bearings, pistons, rings, lifters, oil pump, gaskets, Viton™ valve seals, freeze plugs, galley plugs, and either a new timing chain (with new tensioners) or a new timing belt (with new tensioner). If an engine has a timing-driven water pump, a new pump is installed.
• SIM Testing – Each engine is SIM tested after reassembly, with the cooling and oil systems being fully pressurized and the crank being spun at high RPM to verify compression and build quality.

What’s Included In Your GM 2.4L Ecotec Package?

Our remanufactured GM 2.4L Ecotecs comes as a complete long block with:

• Cylinder head installed
• Oil pan installed (only on federal emissions models)
• Timing cover installed (only on California emissions models)
• Valve cover installed (only on federal emissions models)
• Finishing gaskets

That means less hassle at install time and fewer chances of a shop cutting corners. And keep in mind that we only offer the federal emissions model of this engine.

Here’s where we really shines: our warranty coverage. Depending on your needs, you can choose:

• 3-year warranty
• 5-year warranty
• 7-year warranty
• Pure Care No-Fault Protection (up to 1 million miles!)

That last one is a game-changer. Our Pure Care coverage offers security at a level no other remanufacturer in the industry matches.

Why Choose A Remanufactured GM 2.4L Ecotec?

For many car owners, the choice comes down to three factors: cost, reliability, and peace of mind. A junkyard motor may be cheap, but it’s a gamble – you don’t know how it was treated or if the same problems will crop up again. A dealership replacement may cost more than the car is worth. With a remanufactured GM 2.4L Ecotec from Powertrain Products, you’re getting:

• A fully tested engine that corrects known failure points.
• New internal components to maximize reliability.
• The best warranty protection in the industry.

Remanufactured GM 2.4L Ecotec Engines From Powertrain Products

The GM 2.4L Ecotec may have its flaws, but with the right replacement engine, you can keep your SUV running strong for years to come. Powertrain Products’ remanufactured Ecotecs are built for longevity, backed by unmatched warranties, and designed to give you confidence every time you turn the key.

If you’re considering a replacement, just make sure your mechanic checks your catalytic converters and understands why your original engine failed. Do that, and you’ll be setting yourself up for long-term success with your new remanufactured 2.4L Ecotec – order today!