NP231 Transfer Case for 1987-1990 Jeep Cherokee, Commanche, w/ Slip Yoke Eliminator Kit
- Units are shipped in high density plastic totes to help eliminate in-transit damage.
- 100% replacement of seals, bearings, viscous couplers (when applicable) and other common wear components.
- All cases are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
- All units are quality inspected throughout the remanufacturing process to maintain our quality standard.
This fully remanufactured Transfer Case is backed by an available 7 year, 1 million mile warranty.
Questions? Call Toll-Free: 888-842-0023.
Fitment Guarantee - We call to verify every order so you get the exact powertrain product you need!
Description
Application Notes:NV231; NOT FOR STOCK APPLICATIONS, 21 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 1.75 Inch Diameter Speedo Hole, Vacuum Shift Indicator Switch On Speedo Housing, Built With a Slip Yoke Eliminator Kit With a 1310 CV Style Rear Yoke, WILL REQUIRE AN AFTERMARKET REAR DRIVESHAFT (not included), Tag Numbers: 53003927, 53004301, 53006092, 53008207, 53008208, Hollander Numbers: 412-212, 412-240, Other Numbers: UMT207-5NV231; NOT FOR STOCK APPLICATIONS, 21 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 1.75 Inch Diameter Speedo Hole, Vacuum Shift Indicator Switch On Speedo Housing, Built With a Slip Yoke Eliminator Kit With a 1310 CV Style Rear Yoke, WILL REQUIRE AN AFTERMARKET REAR DRIVESHAFT (not included), Tag Numbers: 53003927, 53004301, 53006092, 53008207, 53008208, Hollander Numbers: 412-212, 412-240, Other Numbers: UMT207-5.
Remanufacturing Process
Every transfer case we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:
- Deep Clean – To start the remanufacturing process, each transfer case is fully disassembled and cleaned
- Inspection – Each transfer case is carefully inspected for cracks, excessive wear, shaft warp, and chain stretch
- New Components – All seals, bearings, joints and rings are replaced as well as electrical components (solenoids and control units)
- Validation – After reassembly, each individual transfer case is spin tested as part of a detailed checklist validation process
Because of our rigorous remanufacturing process, we can offer the industry’s best warranty on remanufactured transfer cases. Each transfer case comes with up to 7 years and 1 million miles of warranty, which can be upgraded to include Pure Care™ no-fault protection. No other transfer case manufacturer comes close.
Additional information
Weight | 74 lbs |
---|---|
Dimensions | 18 × 24 × 34 in |
Product Type | Transfer Cases |
Application Notes | NV231; NOT FOR STOCK APPLICATIONS, 21 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 1.75 Inch Diameter Speedo Hole, Vacuum Shift Indicator Switch On Speedo Housing, Built With a Slip Yoke Eliminator Kit With a 1310 CV Style Rear Yoke, WILL REQUIRE AN AFTERMARKET REAR DRIVESHAFT (not included), Tag Numbers: 53003927, 53004301, 53006092, 53008207, 53008208, Hollander Numbers: 412-212, 412-240, Other Numbers: UMT207-5 |
Model Number | NP231 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.