NP231 Transfer Case for 1989-1995 Jeep Wrangler & Cherokee, w/ Slip Yoke Eliminator Kit
$2,049.00 Original price was: $2,049.00.$1,849.00Current price is: $1,849.00.
- Units are shipped in high density plastic totes to help eliminate in-transit damage.
- 100% replacement of seals, bearings, viscous couplers (when applicable) and other common wear components.
- All cases are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
- All units are quality inspected throughout the remanufacturing process to maintain our quality standard.
This fully remanufactured Transfer Case is backed by an available 7 year, 1 million mile warranty.
Questions? Call Toll-Free: 888-842-0023.
Order Online
Be sure to check application notes and verify VIN code/cast no. before ordering.
Fitment Guarantee - We call to verify every order so you get the exact powertrain product you need!
Description
Application Notes:NV231; NOT FOR STOCK APPLICATIONS, 23 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 1.75 Inch Diameter Speedo hole, 2 Pin Shift Indicator Switch Above Shift Lever, Built With a Slip Yoke Eliminator Kit With a 1310 CV Style Rear Yoke, WILL REQUIRE AN AFTERMARKET REAR DRIVESHAFT (not included), Tag Numbers: 52093497, 52097522, 52097695, 52097890, 52098362, 52098487, 52099695, 53005382, 53006096, 53008212, Hollander Numbers: 412-210, 412-309, 412-326, 412-328A, 412-328B, Other Numbers: UMT207-1NV231; NOT FOR STOCK APPLICATIONS, 23 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 1.75 Inch Diameter Speedo hole, 2 Pin Shift Indicator Switch Above Shift Lever, Built With a Slip Yoke Eliminator Kit With a 1310 CV Style Rear Yoke, WILL REQUIRE AN AFTERMARKET REAR DRIVESHAFT (not included), Tag Numbers: 52093497, 52097522, 52097695, 52097890, 52098362, 52098487, 52099695, 53005382, 53006096, 53008212, Hollander Numbers: 412-210, 412-309, 412-326, 412-328A, 412-328B, Other Numbers: UMT207-1.
Remanufacturing Process
Every transfer case we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:
- Deep Clean – To start the remanufacturing process, each transfer case is fully disassembled and cleaned
- Inspection – Each transfer case is carefully inspected for cracks, excessive wear, shaft warp, and chain stretch
- New Components – All seals, bearings, joints and rings are replaced as well as electrical components (solenoids and control units)
- Validation – After reassembly, each individual transfer case is spin tested as part of a detailed checklist validation process
Because of our rigorous remanufacturing process, we can offer the industry’s best warranty on remanufactured transfer cases. Each transfer case comes with up to 7 years and 1 million miles of warranty, which can be upgraded to include Pure Care™ no-fault protection. No other transfer case manufacturer comes close.
Additional information
Weight | 74 lbs |
---|---|
Dimensions | 18 × 24 × 34 in |
Product Type | Transfer Cases |
Application Notes | NV231; NOT FOR STOCK APPLICATIONS, 23 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 1.75 Inch Diameter Speedo hole, 2 Pin Shift Indicator Switch Above Shift Lever, Built With a Slip Yoke Eliminator Kit With a 1310 CV Style Rear Yoke, WILL REQUIRE AN AFTERMARKET REAR DRIVESHAFT (not included), Tag Numbers: 52093497, 52097522, 52097695, 52097890, 52098362, 52098487, 52099695, 53005382, 53006096, 53008212, Hollander Numbers: 412-210, 412-309, 412-326, 412-328A, 412-328B, Other Numbers: UMT207-1 |
Model Number | NP231 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.