Fitment Guarantee - We call to verify every order so you get the exact powertrain product you need!

NP231 Transfer Case for 1997-2002 Jeep Wrangler 4Cyl MT with Slip Yoke Eliminator Kit

  • Units are shipped in high density plastic totes to help eliminate in-transit damage.
  • 100% replacement of seals, bearings, viscous couplers (when applicable) and other common wear components.
  • All cases are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
  • All units are quality inspected throughout the remanufacturing process to maintain our quality standard.

This fully remanufactured Transfer Case is backed by an available 7 year, 1 million mile warranty.

Questions? Call Toll-Free: 888-842-0023.

SKU: 14828TC Categories: ,

Fitment Guarantee - We call to verify every order so you get the exact powertrain product you need!

Description

Application Notes:NV231; NOT FOR STOCK APPLICATIONS, 21 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 2 Pin Shift Indicator Switch Above Shift Lever, Built With a Slip Yoke Eliminator Kit With a 1310 CV Style Rear Yoke, WILL REQUIRE AN AFTERMARKET REAR DRIVESHAFT (not included), Hollander Numbers: 412-348, Tag Numbers: 52098471, 52099310, 52099310AB, 52099364, 52099364AB, 52099364AENV231; NOT FOR STOCK APPLICATIONS, 21 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 2 Pin Shift Indicator Switch Above Shift Lever, Built With a Slip Yoke Eliminator Kit With a 1310 CV Style Rear Yoke, WILL REQUIRE AN AFTERMARKET REAR DRIVESHAFT (not included), Hollander Numbers: 412-348, Tag Numbers: 52098471, 52099310, 52099310AB, 52099364, 52099364AB, 52099364AE.

Remanufacturing Process

Every transfer case we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:

  • Deep Clean – To start the remanufacturing process, each transfer case is fully disassembled and cleaned
  • Inspection – Each transfer case is carefully inspected for cracks, excessive wear, shaft warp, and chain stretch
  • New Components – All seals, bearings, joints and rings are replaced as well as electrical components (solenoids and control units)
  • Validation – After reassembly, each individual transfer case is spin tested as part of a detailed checklist validation process

Because of our rigorous remanufacturing process, we can offer the industry’s best warranty on remanufactured transfer cases. Each transfer case comes with up to 7 years and 1 million miles of warranty, which can be upgraded to include Pure Care™ no-fault protection. No other transfer case manufacturer comes close.

Additional information

Weight74 lbs
Dimensions18 × 24 × 34 in
Product Type

Transfer Cases

Application Notes

NV231; NOT FOR STOCK APPLICATIONS, 21 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 2 Pin Shift Indicator Switch Above Shift Lever, Built With a Slip Yoke Eliminator Kit With a 1310 CV Style Rear Yoke, WILL REQUIRE AN AFTERMARKET REAR DRIVESHAFT (not included), Hollander Numbers: 412-348, Tag Numbers: 52098471, 52099310, 52099310AB, 52099364, 52099364AB, 52099364AE

Model Number

NP231

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Vehicle Fitment

    Product Attributes