Dana 50 Front Differential Assembly for 1999-2000 F250/F350, SRW, 4 Whl ABS, 4.30 Ratio
$2,499.99 Original price was: $2,499.99.$2,199.00Current price is: $2,199.00.
- All tubes are inspected to ensure they are straightened to OEM specifications.
- All housings are tested for surface wear and cracks.
- 100% inspection of all internal parts, including Ring and Pinion’s, Internal Gears, Clutch’s and Carrier’s
- 100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
- All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
- Correct rolling torque established using inch pound measurement’s for precision setup and longevity
This fully remanufactured Front Differential Assembly is backed by an available 7 year, 1 million mile warranty.
Questions? Call Toll-Free: 888-842-0023.
Order Online
Be sure to check application notes and verify VIN code/cast no. before ordering.
Fitment Guarantee - We call to verify every order so you get the exact powertrain product you need!
Description
Application Notes:Ratio: 4.30; Dana 50, 9 Inch Ring Gear, 13 mm Thick Hub Flanges, 4 Wheel ABS, 0.881″ Track Bar Mount Hole, From 3/15/99Ratio: 4.30; Dana 50, 9 Inch Ring Gear, 13 mm Thick Hub Flanges, 4 Wheel ABS, 0.881″ Track Bar Mount Hole, From 3/15/99.
Remanufacturing Process
Every differential and axle assembly we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:
- Deep Clean – To start the remanufacturing process, each unit is fully disassembled and cleaned.
- Inspection – The ring and pinion, internal gears, clutches and carriers are carefully inspected. Gears are checked for proper tooth contact, and axle tubes are inspected for straightness.
- New Components – All seals and bearings are replaced, and gears are reset for correct rolling torque for maximum efficiency and performance. Backlash is reset carefully for maximum longevity and quiet operation.
- Validation – After reassembly, each unit is spin tested as part of a detailed checklist validation process.
Because of our rigorous remanufacturing process, we can offer the industry’s best warranty on remanufactured differentials and axle assemblies. Each one comes with up to 7 years and 1 million miles of warranty, which can be upgraded to include Pure Care™ no-fault protection. No other front differential assembly manufacturer comes close.
Additional information
Weight | 280 lbs |
---|---|
Dimensions | 80 × 30 × 24 in |
Product Type | Differentials |
Application Notes | Ratio: 4.30; Dana 50, 9 Inch Ring Gear, 13 mm Thick Hub Flanges, 4 Wheel ABS, 0.881" Track Bar Mount Hole, From 3/15/99 |
Axle Family | Dana 50 |
Gear Ratio | 4.30 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.