GM 12 Bolt 8.875″ Axle Assembly, 3.42 Ratio, w/o Posi Traction
$2,199.99 Original price was: $2,199.99.$1,999.00Current price is: $1,999.00.
- Correct rolling torque established using inch pound measurement’s for precision setup and longevity
- All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
- 100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
- 100% inspection of all internal parts, including Ring and Pinion’s, Internal Gears, Clutch’s and Carrier’s
- All housings are tested for surface wear and cracks.
- All tubes are inspected to ensure they are straightened to OEM specifications.
This fully remanufactured Rear Axle Assembly is backed by an available 7 year, 1 million mile warranty.
Questions? Call Toll-Free: 888-842-0023.
Order Online
Be sure to check application notes and verify VIN code/cast no. before ordering.
Fitment Guarantee - We call to verify every order so you get the exact powertrain product you need!
Description
Application Notes:Ratio: 3.42; GM 12 Bolt 8.875 Inch Ring Gear, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle ShaftsRatio: 3.42; GM 12 Bolt 8.875 Inch Ring Gear, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts.
Remanufacturing Process
Every differential and axle assembly we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:
- Deep Clean – To start the remanufacturing process, each unit is fully disassembled and cleaned.
- Inspection – The ring and pinion, internal gears, clutches and carriers are carefully inspected. Gears are checked for proper tooth contact, and axle tubes are inspected for straightness.
- New Components – All seals and bearings are replaced, and gears are reset for correct rolling torque for maximum efficiency and performance. Backlash is reset carefully for maximum longevity and quiet operation.
- Validation – After reassembly, each unit is spin tested as part of a detailed checklist validation process.
Because of our rigorous remanufacturing process, we can offer the industry’s best warranty on remanufactured differentials and axle assemblies. Each one comes with up to 7 years and 1 million miles of warranty, which can be upgraded to include Pure Care™ no-fault protection. No other differential and axle assembly manufacturer comes close.
Additional information
Weight | 260 lbs |
---|---|
Dimensions | 80 × 30 × 24 in |
Product Type | Differentials |
Application Notes | Ratio: 3.42; GM 12 Bolt 8.875 Inch Ring Gear, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts |
Axle Family | 12 Bolt |
Gear Ratio | 3.42 |
Ring Gear Diameter | 8.9 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.