Fitment Guarantee - We call to verify every order so you get the exact powertrain product you need!
BW1345 Manual Shift Transfer Case for 1980-1986 Ford F-series, 1982-1986 Bronco
Original price was: $1,549.00.$1,399.00Current price is: $1,399.00.
- All units are quality inspected throughout the remanufacturing process to maintain our quality standard.
- All cases are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
- 100% replacement of seals, bearings, viscous couplers (when applicable) and other common wear components.
- Units are shipped in high density plastic totes to help eliminate in-transit damage.
This fully remanufactured Transfer Case is backed by an available 7 year, 1 million mile warranty.
Questions? Call Toll-Free: 888-842-0023.
Order Online
Be sure to check application notes and verify VIN code/cast no. before ordering.
Fitment Guarantee - We call to verify every order so you get the exact powertrain product you need!
Description
Application Notes: BW1345; 32 Spline Rear Output Shaft, Bolt On Front And Rear Output Yokes, Shift Lever Points Down in Neutral, 0.875 Inch Speedo Hole, Tag Numbers: E1TA-EB, E3TA-CB, E3TA-FA, E3TA-FB, E3TA-GA, E3TA-GB, E3TA-HB, E6TA-EA, E6TA-JA, E7TA-TA, E7TA-UA, E7TA-VA, Hollander Numbers: 412-335, 412-382, Other Numbers: UMT405-1.
Remanufacturing Process
Every transfer case we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:
- Deep Clean – To start the remanufacturing process, each transfer case is fully disassembled and cleaned
- Inspection – Each transfer case is carefully inspected for cracks, excessive wear, shaft warp, and chain stretch
- New Components – All seals, bearings, joints and rings are replaced as well as electrical components (solenoids and control units)
- Validation – After reassembly, each individual transfer case is spin tested as part of a detailed checklist validation process
Because of our rigorous remanufacturing process, we can offer the industry’s best warranty on remanufactured transfer cases. Each transfer case comes with up to 7 years and 1 million miles of warranty, which can be upgraded to include Pure Care™ no-fault protection. No other transfer case manufacturer comes close.
Additional information
| Weight | 80 lbs |
|---|---|
| Dimensions | 32 × 28 × 19 in |
| Model Number | BW1345 |
| Application Notes | 31 Spline Front Input Front And Rear Fixed Yokes Shift Lever Is Downward Parallel To Case When In E1ta-Eb,E3ta-Cb,E3ta-Fa,E3ta-Fb,E3ta-Ga,E3ta-Gb,E3ta-Hb,F6ta-Ja,E7ta-Ta. 32 Spline Rear Output Shaft, Bolt On Front And Rear Output Yokes, Shift Lever Points Down in Neutral, 0.875 Inch Speedo Hole, Tag Numbers: E1TA-EB, E3TA-CB, E3TA-FA, E3TA-FB, E3TA-GA, E3TA-GB, E3TA-HB, E6TA-EA, E6TA-JA, E7TA-TA, E7TA-UA, E7TA-VA, Hollander Numbers: 412-335, 412-382, Other Numbers: UMT405-1 |
| Product Type | Transfer Cases |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.